Home  ›  Can I Have 2 Routers on One Modem

Can I Have 2 Routers on One Modem

Written By Tuesday, February 15, 2022 Add Comment Edit

Download Article

Download Article

Plagued by poor Wi-Fi performance in certain parts of your domicile or function? Or just desire to let more devices to connect to the internet at once? If you take a 2d router that supports WDS, you can "bridge" it with your current router to aggrandize your network reach. Bridging two routers on one network isn't as common every bit it used to exist (thanks to much simpler mesh Wi-Fi systems), just it can all the same be an effective manner to improve network access in larger spaces. This wikiHow article will teach you how to bridge two routers together on a network to improve Wi-Fi access in your home or function.

  1. i

    Make certain your second router supports WDS bridging or has "bridge manner." Bridging is a feature that lets ii wireless routers work together to expand the range of a wireless network. If the router yous want to add together to your network (the 1 that's not connected directly to the internet) doesn't support bridging, you won't exist able to utilize it to extend your Wi-Fi network.[1]

    • Look for "bridging mode," "WDS," or "repeater function" in your router'due south documentation to see if information technology's supported.

  2. 2

    Make up one's mind which router will exist the master router. The main router is the i that you'll exist connecting directly to the internet. If you have a combination modem and router from your internet provider, that has to be your main router.

    Advertisement

  3. 3

    Get a long plenty ethernet cablevision to connect your ii routers. Yous'll usually need to run an ethernet cablevision between your two routers, even if you're bridging to create a new wireless admission betoken. Some wireless routers support bridging wirelessly, just this is unremarkably but when both routers are the same model and/or manufacturer.

    • The ethernet cablevision yous utilize to connect your ii routers should not exceed 320 ft. A longer cable could seriously touch network quality.

    Advertisement

  1. i

    Connect your main router to the internet. The main router is the i that comes from your cyberspace provider (if applicable), or the one that plugs directly into your modem. To connect your router to the internet:

    • If the router and modem are combined in one device: Connect the device to the net port on the wall using the network or coaxial cable that came with it, and plough information technology on.
    • If the modem and the router are divide devices: Connect the modem to the internet port on the wall using the network or coaxial jack that came with it. Then, insert an ethernet cable into your router's WAN (or Net) port, and connect the other end to the modem.

  2. 2

    Connect your computer to the master router with an ethernet cable. It'southward best to use an ethernet cable during setup, even if your primary router has Wi-Fi. The main router is the 1 that comes from your cyberspace provider (if applicable), or the 1 that plugs straight into your modem.

    • 1 finish of the ethernet cable should connect to one of the LAN ports on your router (they'll typically exist labeled as such, or with numbers), and the other connects to the Ethernet port on your reckoner.

  3. 3

    Become to your router's admin website. You can practise this past opening a web browser, such every bit Edge or Safari, and entering the router's IP accost into the address bar equally if it were a regular website. The IP address is usually 10.0.0.one or 192.168.i.1, just it varies by router. Here's how to detect the correct IP accost:

    • Windows:
      • Open the Windows Beginning menu and click the Settings gear.
      • Click Network & Internet.
      • In the right console, click View hardware and connexion properties.
      • Find the IP accost next to "Default Gateway."
    • macOS:
      • Click the Apple tree menu and select System Preferences.[two]
      • Click the Network icon.
      • Click your Ethernet connection in the left panel.
      • Click the Advanced button at the bottom.
      • Click the TCP/IP tab and observe the IP accost side by side to "Router."

  4. 4

    Log in as an administrator. If you're not sure of the admin username and/or password for your router, check your documentation, or look for a sticker on the router itself. You lot tin also search the internet for your router model and "default administrator countersign."

  5. v

    Turn on DHCP. DHCP is the protocol that assigns IP addresses to devices that join your Wi-Fi network. For example, if your router'southward IP address is 192.168.one.ane, it will typically assign IP addresses at random from a range of addresses commencement with 192.168.1.two and catastrophe with 192.168.1.254. Discover the DHCP settings in your router (which may be in a department chosen LAN setup or similar) and then plough on DHCP if it's off.

  6. 6

    Write downward the Wi-Fi details. You lot'll need to set some details in your secondary router to encounter what you encounter in this router. This will let you lot to log into the either router wirelessly using the same Wi-Fi password, as well equally allows the secondary router to connect wirelessly to the commencement router (if supported by your secondary router).[three]

    • Locate the Wireless or Wi-Fi Security expanse of your router'south admin website.
    • Write downwards the SSID (may too be called Network Name) and password.
    • Write downwards the value of "Security manner," "Network mode," or "Encryption mode."
    • Write down the frequency, such as five GHz or 2.4 GHz.
    • Go to the LAN or Network section of the router and write downwards the Cyberspace (IPV4) IP address and subnet mask.
    • If you lot have a TP-Link or Linksys router, yous tin can skip this, just for many other routers, you lot'll need to write down the MAC address so you tin enter it into the secondary router.

  7. 7

    Save your changes and disconnect. If you lot oasis't made any changes, no demand to salve anything. But if you accept, click the Relieve choice and then unplug the ethernet cable from your computer. Y'all now have everything you lot demand to set up up your new router.

    • It's a skilful idea to also turn off your master router for a while then that your calculator doesn't accidentally connect to it via Wi-Fi when you're trying to prepare your secondary (bridging) router.[4]

    Advertizement

  1. 1

    Connect the second router to your computer. Once yous've disconnected from the master router, you lot'll desire to connect the router that will be acting as a bridge to your figurer so you tin can configure it. Here's how:

    • Using the same ethernet cablevision, plug ane cease of the cable into your computer's ethernet port and the other end into one of the LAN or numbered ports on the second router.
    • Plug in the router and turn it on.

  2. 2

    Log in to this router'due south admin website. This is the same procedure as with logging in to your main router's website—detect the IP address (which might be the same) then sign in with the username and default password.

  3. three

    Enable Bridging Style on this router. The steps and terminology vary by router model, only y'all'll usually need to navigate to a section chosen "Connection type" or "Network Mode" and choose Span Way, Bridged, WDS, or Repeater from a bill of fare. Check your documentation to find the exact location.[v]

    • On TP Link models, you'll demand to go to Advanced > System Tools > System Parameters and click Enable WDS Bridging.[six]
    • On Netgear routers, become to Advanced > Avant-garde Setup > Router/AP/Bridge/Repeating Mode and select Enable Wireless Repeating Function. And so, choose Wireless Repeater.

  4. 4

    Configure bridging mode. One time you lot've turned on bridging mode, at that place are some details you'll demand to provide the router and so information technology knows how to communicate with your chief router. The steps are going to be a lilliputian different on all models.

    • On TP-Link models, you can click Survey, select the principal router'south SSID, and click Choose. So, enter the primary router'south Wi-Fi password (if requested) and click Save to automatically gather the details from that router.
    • On most other routers, you'll demand to specify the default gateway, which is that IP address you used to log in to your primary router.
    • You'll normally also have to enter the Subnet Mask, which should match the main router.
    • If prompted to enter an IP accost, enter whatever accost on the same range as the principal router. For example, if the main router's IP accost is 192.168.0.1 and the subnet mask is 255.255.255.0, you tin make this router's IP address annihilation betwixt 192.168.0.2 and 192.168.0.254.
    • If supported by your routers, you may exist able to connect the secondary router to the first router wirelessly. Y'all'll have better results with an ethernet cablevision, only if a wireless connection is possible, you lot'll need to enter your other router'southward details into the Bridge Mode settings. Enter the original router's SSID (network name), password, security style, aqueduct, and Wi-Fi network frequency (e.thou., 5 GHz).
    • On most routers, turning on bridging fashion will automatically disable the DHCP server on the secondary router. This is a good thing. If the DHCP server does not plough off when you enable bridging way, locate your DHCP settings on the secondary router and disable DHCP.

  5. 5

    Update the Wi-Fi settings on the secondary router. If y'all plan to permit devices to connect to the secondary router via Wi-Fi, you will want the SSID to be a trivial different than the SSID of your primary router. You tin can make the SSID of the secondary router similar to the original router, just with a descriptor. Set the Wi-Fi password and security mode to match the primary router.

    • For example, if your router is called Netgear2021, y'all tin can call this secondary router something like Netgear2021-Upstairs if it'due south upstairs.

    Advertisement

  1. i

    Place your routers. Now that everything is configured, you can place your routers wherever you need. Retrieve, y'all'll want to use an Ethernet cable that'due south no longer than 320 feet to connect the routers together (unless your routers back up WDS). If yous're using a compatible Wi-Fi router that supports wireless bridging, minimize concrete obstructions, such as brick walls and metallic frames or siding for best results.[vii]

    • Brand sure the primary router is connected to the modem (if divide). One end of the Ethernet cable should be continued to the primary router's Internet or WAN port, and the other end into the modem or wall jack.
    • You lot can run Ethernet cable through the wall if you need to attain another room.

  2. 2

    Connect the two routers together. Plug one end of the Ethernet cablevision to i of your chief router's LAN (Ethernet) ports, and the other into to any available LAN port on secondary router.

  3. 3

    Restart both routers once connected. You can do this by unplugging each router's power cable and plugging it back in a few seconds later. After a minute or so, the routers will come up back up. Both volition now exist accessible and connected to the internet.

    • If yous need to connect to the secondary router'due south admin website, yous can do so by entering its new IP accost into your web browser's address bar. The previous IP address will at present only work for the primary router.

    Advertisement

Add New Question

  • Question

    Can I brand a network consisting of two or more routers using WiFi?

    Community Answer

    Yes, run into Method 2, Step 1.

  • Question

    Can computers come across each other while they are on unlike routers? For example, a PC on 1 router sees the computers or printers on the other router?

    Community Answer

    If it is a LAN to WAN connection, then they cannot see each other unless y'all take a VPN setup.

  • Question

    What if the modem houses the main router and there are two different bands (2.4GHz and 5.0GHz)?

    Community Answer

    That the modem houses the primary router makes no difference to the instructions given in the article, and the 5GHz band(s) do non overlap with the 2.4GHz band.

  • Question

    If I setup a LAN to LAN network, volition the secondary router be able to transport out a WiFi signal?

    Community Answer

    Yeah. You lot can disable WiFi on your main router and enable it merely on your second router.

  • Question

    How do I ready up a VPN network?

    Community Answer

    It's not clear from your question if you want to set up upwardly a VPN client or a VPN server. OpenVPN is probably the reply to either question, though. If yous're looking to connect to a commercial VPN service to gain anonymity, and so the service provider volition have to answer your question. If you intend to set a server and then you can remotely access your master calculator, OpenVPN volition do anything yous need -- it's free and a fully-featured, enterprise-class solution. To set it up, you'll need to open port 1194 UDP on your router and point information technology at your server.

  • Question

    My secondary router for wireless repeating asks for a base station MAC address, can anyone assist?

    Community Answer

    The MAC accost it wants is the MAC address of the base of operations station, the router continued directly to the modem. You lot need to make sure your figurer is direct connected to the base station, not one of the satellites and access the base stations config page (at 192.168.one.i or 192.168.1.0 unremarkably). The MAC will be institute nether either the Data Tab (usually) or sometimes under Router Settings. Information technology will be in hexadecimal numbers 0-f and will look something like this: 20:xx:xx:twenty:xx:twenty.

  • Question

    Why would my secondary router drop its connection every infinitesimal?

    Community Answer

    Use a mobile device to check for congestion on whichever channel you have information technology set to (article recommends channel xi). Some other distinct possibility is bug-ridden firmware on your router. To remedy that, check for updated firmware from the manufacturer's website. Upload the latest firmware available onto your router, even if information technology'south the aforementioned version already on there.

  • Question

    How do I connect ii unlike broadband connections to my routers?

    Community Answer

    Y'all demand ii modems, equally well as two routers. And yous volition well-nigh likely take to pay for all of them.

  • Question

    If I go to a hotel with wi-fi, can I install my ain router off their wi-fi to go added security? How would I do that?

    Community Answer

    It's a complicated task simply yes it can exist done. Assuming your router supports running a VPN Client and you have a paid or self-hosted VPN Server. All yous have to do is login to your router's configuration pages and connect your Router to their WiFi network. Assuming you accept your VPN connectedness pre-configured your router will automatically tunnel all your network traffic via your VPN Server. Your devices may exist required to connect via wired medium to your router.

  • Question

    My secondary router is asking for Main DNS address when I am trying to enter a static IP address for WAN in WAN-LAN in Stride 6. I am as well supposed to enter a Gateway accost in that location. What can I do?

    Community Answer

    Use the LAN side IP accost of the upstream router. This will exist 192.168.ane.1 in the article'southward case. However, you could leave the default DHCP setting, and personally, I'd advise that. If it'south important to have a specific IP address on router two, utilise DHCP Leases/Reservations on the first router.

Show more answers

Ask a Question

200 characters left

Include your e-mail address to become a message when this question is answered.

Submit

Advertizing

Nearly This Article

Article Summary X

one. Connect the primary router to your computer.
2. Configure the principal router.
3. Alter the DHCP settings.
4. Disconnect the router from the computer.
v. Connect the secondary router to the computer.
6. Configure the secondary router.
7. Modify the DHCP settings.
viii. Change the wireless channels to eliminate interference.
9. Connect the primary router to the modem.
10. Connect the two routers with an Ethernet cable.

Did this summary assistance you?

Thank you to all authors for creating a page that has been read three,290,282 times.

Is this commodity up to date?

parrisgaidweed.blogspot.com

Source: https://www.wikihow.com/Connect-Two-Routers

0 Response to "Can I Have 2 Routers on One Modem"

Post a Comment

Subscribe to: Post Comments (Atom)

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel